Steel Sealant – Dubai, UAE

EliteStop complete system for weather, moisture and water

Unique LIFE water seal tapes and sealant material for Steel roofs, Roof & walls penetrations, swimming pools, compo roof systems, construction joint, expansion joint, Façade, Precast & GRC, basements leakage.

Exceptional adhesion to any kind of material

Stone
Polycarbonate
Glass
Concrete
Plaster
Ceramic
TPO
OLD PVC
SBS/APP
Asphalt
Gypsum Board
Wood
Propylene
Polystyrene
Fiberglass
Metal
EPDM
Polyethylene

Product Range

ROOFSEAL-Roof Seam Repair Tape

For Data Sheet/Flyer/SDS

LIFESEAL a revolutionary Microsealant Technology features a UV stable backing. LifeSeal is a one-step permanent repair system for all roof types. LifeSeal creates a waterproof, moisture, and air tight barrier that remains flexible to extremely low and high temperatures. Bonds to a wide range of surfaces including difficult roof materials.

Features

Maintain all characteristic
at temperatures from
-57ºC to 93ºC .
Life expectation
35+ years.
10-year warranty.
Exceptional Adhesion strength
3.6 Kg/cm width.
Chemically stable,
solvents / VOC free.
UV
resistance
Encapsulation activates instant bonding with the surface.

Application

On Gutters

On Skylights

Doors & Windows

On Pipes

on Flashing

on Composite Panels

on Metal Roofs

DOUBLESTICK-Roof Repair Tape

For Data Sheet/Flyer/SDS

LIFESEAL-DS is an advanced MicroSealant tape with a removable siliconized release liner on each side. Designed to bond two surfaces made of two or more dissimilar materials. LIFESEAL-DS creates a permanent, waterproof seal that remains flexible to extremely low and high temperatures. Bonds to a wide range of surfaces including difficult materials. LIFESEAL-DS prevent water leak through screws locations when applied below the part to be installed.

Features

Maintain all characteristic
at temperatures from
-57ºC to 93ºC.
Life expectation
35+ years.
10-year warranty.
Exceptional Adhesion strength
3.6 Kg/cm width
.
Chemically stable,
solvents / VOC free.
UV
resistance
Encapsulation activates instant bonding with the surface.

Applications

Sealing
Fastener Perforations.

Sealing Perforationson
Metal Roof Joints.

Sealing Perforationswhen
Fixing Metal Flashing.

Sealing Perforations On
Roofing Breather Membranes

E-CURB™ PENETRATION SEAL SYSTEM

For Data Sheet/Flyer/SDS

PENETRATIO is a moisture curing, pourable sealant designed for use in pitch pans and warranted FORMCAST penetration seals. PENETRATIO is suitable for application in damp, dry, or cold climates. PENETRATIO is solvent free, contains no isocyanates and will not shrink upon curing. PENETRATIO has resilient “elastomeric” properties and excellent adhesion to most construction materials.

Features

Ready to use,
No mixing required.
Elongation capacity
up to 300%.
Customizable – Flexible,
fits all penetration.
Remains flexible Elastomeric
regardless of temperatures.
Never Shrink.
100% waterproof,
UV and ozone resistant.
Temperatures high as
+100ºC up to +204 ºC.
Strong Adhesion.

Simple Application

1. Prime penetrations using M-1

2. Press the curb in place.
Seal around the joints

3. Fill curb with 1-Part

Application

Penetrations on
Concrete

Penetrations on
Metal Roofs

Penetrations on
GRC/Precast

Multiple
Penetrations

Vertical
Penetrations !!!

Irregular Shaped
Penetrations

SEALANTS

Silicon Polymer Technology

Solvent free.
100% solids.
Never shrink.
Non-slump, applies vertically and overhead.

Moisture cure.
UV resistance and Color stable.
Color stability, will not suntan.
Application at all temperatures.
Available in a wide range of colors.

M-1CR CLEAN ROOM

For Data Sheet/Flyer/SDS

Extremely low VOC.
Suitable when outgassing and solvents are not
Releases virtually no molecular air contamination.
Isocyanates free.
The product has resilient elastomeric
Excellent adhesion to the most construction materials.
where molecular airborne contamination can impact health.
Specified for biomedical, electronic, aerospace clean rooms.

METALINK

HIGH PERFORMANCE METAL ROOF SEALANT

For Data Sheet/Flyer/SDS

± 50% joint movement.
Elongation 600%.
Service Temperature -62°C to 204°C.
Bonds to aluminum, steel, and copper.
Strong adhesion to non-metal materials too.
Neutral cure. Will not promote corrosion of metal
Bonds to Kynar 500® PVDF coated metal.
Metal roofs, gutters, and any architectural metal.
Resists cracking, through extreme weather cycles.
Isocyanate free.

DURALINK®50

SUPER ADHESION SEALANT

For Data Sheet/Flyer/SDS

Validated for ± 50% joint movement.
Elongation 700%.
Used in joints subject to movement.
Amazing adhesion to most Difficult surfaces.
Bonds to PVDF and anodized coated metals.
Paintable within 24 hours.

M1/Marine

STRUCTURAL ADHESIVE / SEALANT

For Data Sheet/Flyer/SDS

Applications (after curing) below the water
Excess 35% compression-extension movement.
Elongation 525% (325% for M1 marine.)
Can be applied in damp, dry, or cold climates.
Isocyanate
Paintable within 24 hours.

M1/Pool

UNIVERSAL ADHESIVE & SEALANT

For Data Sheet/Flyer/SDS

Polyether super Adhesive sealant.
Ideal for bonding pool tiles
Filling pool cracks
No solvents
No Odor
Non- Shrinking
Up to 380 psi strength

Features

Solvent free,
No outgassingon damp surfaces
Bonds to Kynar 500
PVDF coated metal
Ready to use,
No Mixing required
Elongation capacity
up to 700%.
Non-slump, applies
vertically and overhead
100% solids,
Never Shrink
100% waterproof,
UV and ozone resistant.
Work at Temperatures
up to +93 ºC
Paintable within 24 hours
40 minute skin over

Application

Expansion Joints

Curtain Wall

GRC/Precast

Block Work Joint

Parapet Coping

Basement Cove Joint

GAPSEAL

Expandable Foam tape

ELITEPSTOP GAPSEAL is supplied as a precompressed roll, with one side being self-adhesive to assist with initial positioning. Available in a number of different widths and thicknesses. Used in the correct way, Eliteproof GAPSEAL is suitable for many different weather resistance applications.

Time To Ditch Silicone

Features

Fire Retardant
Easy and fast to apply
Minimize number of labors
required on site
Uniform and excellent look
all over the elevation
Improves energy efficiency
in buildings
Weather, water tight
and UV resistance
Expands to find
its own level
Seals different level
Clean product
(compared to silicones and mastics)
Masking tape is
Not Required
Accommodates joint movement
Can be painted
after installation

Application

Expansion Joints

Doors / Windows Curtain Wall

GRC/Precast

Block Work / Slab Joint

Fire System Joint Seal

Construction Joint

FLEX

Uncured Self Adhesive EPDM Membrane

To easily form flashings around corners and penetrations. Specifically designed for use in areas that cannot be properly detailed with cured EPDM membrane. The Peel & Stick Flashing is an uncured EPDM sheet with a release liner and a factory laminated, self-adhering EPDM/butyl tape. This product is formulated to provide high initial strength in both peel and shear at typical rooftop temperatures. It also improves the speed and quality of flashings on all roofing systems.